99久久国产免费福利_瑜伽裤国产一区二区三区_丝袜人妻无码专区视频_国产美女视频国产视视频

本文由金屬剪切機、廢鋼打包機廠家江陰市鳴澄液壓機械有限公司整理提供，更多資訊請訪問：tongchuangbio.com

 

　　 打包機工作流程：帶子送到位→收到捆扎信號→制動器放開，主電機啟動（1）→右頂刀上升，頂住右帶于滑板處（2）→"T"型導板后退（3）→接近開關感應到退帶探頭（4）→主電機停轉，制動器吸合（5）→打包機退帶電機轉動，退帶0.35秒（6）→帶子收緊捆在物體上（7）→主電機二次啟動，制動器吸合（8）→大擺桿二次拉帶，收緊帶子（9）→左頂體上升，壓緊下層帶子（10）→加熱片伸進兩帶子中間（11）→中頂刀上升，切斷帶子（12）→中頂刀下降（13）→中頂刀再次上升，使兩帶子牢固粘合（14）→中頂刀下降，左右頂刀同時下降（15）→加熱片復位（16）→滑板后退（17）→"T"型導板復位（18）→接近開關感應到送帶探頭（19）→送帶電機啟動，帶動帶子送帶（20）→大擺桿復位（21）→帶子到位，帶頭頂到"T"型導板上（22）→接近開關感應到雙探頭（23）→主電機停轉，剎車吸合（24）→打包機完成一個工作循環。

Packer working process: send tape in place to receive strapping signal, brake release, main motor startup (1) - > right knife rising, to resist the right belt in skateboard (2) - > type "T" guide back (3) - > proximity switch induction to bring back the probe (4) and main motor stalling, brake and (5) - > packing machine with motor rotation, back out with 0.35 seconds (6) - belt tightening bundle on the object (7) and main motor second start, brake and posed rod (8) and a secondary drawstring, tighten belt (9) - > left acrosome rise, the lower clamping belt (10) - heating into two straps (11) - in the middle top knife, cut the ribbon (12) to the top knife down (13), the top knife to rise again, make the two straps and strong adhesion (14) of the top knife down, left and right top knife fell at the same time (15) and the heating piece reset (16) to slide backward (17), "T" type guide reset (18), close to switch to send with the probe (19) - > send belt motor start, drive belt to send belt (20) - big swinging rod reset (21) - belt in place, leading the top to the "T" type plate (22), close to switch to double probe (23) and main motor stalling, brake and (24) to press to complete a working cycle.